Tate Access Floor Panel, All Steel, 1250, HPL

SKU: Tate-AS1250-Bolted (each) Category: Tag:

Tate Access Floor Panel, All Steel, 1250, HPL are epoxy-coated solid panels rated for static design loads of 1250 lbs. Fits bolted stringer understructures and is factory-laminated with a high-pressure laminate finish.

To receive an email quote,  select a quantity and click Add to Quote. 

Add to Quote

For more assistance please contact our sales department via phone at +1 (888) 247-0986 x2 or by email at sales@team-prosoure.com.

SKU: Tate-AS1250-Bolted (each) Category: Tag:

Tate Access Floor Panel, All Steel, 1250, HPL are epoxy-coated unitized shells consisting of a flat steel top sheet welded to a formed steel bottom pan. Manufactured to exacting tolerances, these non-combustible rigid, solid panels deliver the ultimate in strength and durability with the convenience of lightweight construction. All Steel panels are typically used in data centers or communication rooms when panel weight is a concern due to frequent access or building structural requirements and have a factory-laminated HPL finish.

Key Characteristics

  • Panel weight: 5.25 lbs/ft² bare
  • All steel welded construction
  • Protected from corrosion by a powder paint finish
  • Class A flame spread rating
  • Non-combustible material
  • System Performance Criteria

Tate Standards to CISCA Testing Methods. System Performance Criteria (Tested on Actual Understructure*)

System TypeStatic LoadsRolling LoadsImpact Loads
PanelUnderstructureDesign Loads1Minimum
Ultimate Loads
Safety Factor
(min 2.0)2
10 Passes10,000 Passes
All Steel 12504' Bolted Stringer1250 lbs2500 lbsPASS500 lbs500 lbs150 lbs
All Steel 1250LFFH/Posilock1250 lbs2500 lbsPASS500 lbs500 lbs150 lbs

*All tests are performed using CISCA's Recommended Test Procedures for Access Floors with the exception of Design Load.

  1. System Design Load is based on a permanent set ≤ 0.010” and is verified by loading panels in accordance with the CISCA concentrated load method but with panels installed on actual understructure instead of steel blocks. (Testing on blocks does not represent the performance of an actual installation.) Ultimate, Rolling, and Impact Load tests are performed using CISCA Test Procedures.
  2. Safety Factor is Ultimate Load divided by Design Load.

Product Information

All Steel 1250 HPL Datasheet 24in

All Steel HPL Detail (PDF) 24in

All Steel 1250 HPL Bolted Stringer Spec 24in

Manufacturer

Tate Access Floors

Reviews

There are no reviews yet.

Be the first to review “Tate Access Floor Panel, All Steel, 1250, HPL”